No reviews found
Please sign in so that we can notify you about a reply
IMPA # 812251 – Devcon Plastic Steel Putty (A) 500 g
Devcon Plastic Steel Putty (A) is a steel-filled epoxy compound used to repair, rebuild and bond metal surfaces. Once cured, it can be drilled, tapped, machined and painted.
Technical details
| Specification | Details |
|---|---|
| Type | Two-part epoxy putty |
| Mixing ratio by volume | 2.5:1 (resin to hardener) |
| Working time | Approximately 45 minutes at 24°C |
| Initial hardening | Around 4 hours, depending on conditions |
| Full cure | Approximately 16 hours |
| Hardness | 85 Shore D |
| Compressive strength | 57 MPa |
| Temperature resistance | Up to approximately 120°C dry |
| Pack size | 500 g |
